title

Motorcycles, tools, and garages! A little bit of everything mechanical and technical.

Saturday, April 18, 2015

Custom Hot Wheels - Lickety Split #5

I might have gone a little overboard on engine details.  See this? (note the toothpick for size reference) That's the distributor. The shaft is 1/8" aluminum tubing stuck in another piece of bronze tubing with slots filed into for looks.



Engine coming together.  I think the final count was 23 pieces in just the engine.





The belt was made from a small strip cut from vinyl sticker material.  Was hoping to have the belt actually spin but ran out of time.

I'm good at making messes... While I was building this car I also built myself a mobile workshop to replace all the loose bits and boxes I was carrying back and forth.  You can see a few details about it HERE.  I have some more info on how I stocked it, will need to write a post about that too!



Paint on the wheels.



Paint OFF of the body...  I love stripping them down to the bare metal like this.



Working on the interior.  Seat was made by crushing a piece of aluminum tubing, then bending and filing it into the shape I wanted.


Transmission tunnel, even though the trans is behind the engine...  Had to have something to hold the shifter!  The long strip is the gas and brake pedals, still needed to be trimmed down.



More details. Fin mounts:



Getting there!

Tuesday, April 14, 2015

Spring Riding in Idaho...

The morning commute was great. Mid to high 50's. No wind.  Little overcast but sunny. This afternoon, however, not so great...

Getting ready to leave:




Doesn't look like much until you look out at the field and see all the snow swirling around there in the wind.

Finally made it home.  Fair bit of build up on the front but the roads were just wet and the bridges oddly enough were almost bone dry.





The snow wasn't the bad part- the 30 mph winds + gusts made it less than desirable. It's not even that cold- only about 36 degrees but just a yucky trip home. Apparently, we need to get some longer pants for my 11 yr old son who was with me- his left ankle "was so cold it's about to fall off" by the time we got home.

Sunday, April 12, 2015

ONCE IN A LIFETIME opportunity!

Because, I hope to never, ever be in another play again!  At least not when life is so crazy and I don't ever see life getting less crazy so there you go.  A once in a lifetime opportunity!

I was drafted / conscripted politely invited by my lovely wife to be in a play with her.  We won't go into details about how I politley but firmly refused for 3 days, but was drug to the auditions with the promise of "Just show up and you wont have to do anything" then "oh, by the way you have to sing a song and read something for them"...  I'm not bitter.  :)

Opening night is this Friday!  The play is "The Pirates of Penzance", showing this weekend and the next.




Couple of pics from a dress rehersal:






It has been a royal pain, all of the practices and whatnot... But it has been sorta fun.  I think it's going to turn out great, LOTS of funny business, swords, fight scenes, etc.  Y'all should come and join us for an evening at the historic Nuart Theatre in Blackfoot!

http://blackfootcommunityplayers.com/

Custom Hot Wheels- Lickety Split #4

Back to work. Once I figured out the front end with working steering, my 11 yr old son said I should make it with an actual steering wheel that worked. I kinda scoffed at him and said it would be really hard to do after he explained his idea, but it got me thinking- and I simplified it a lot and came up with this!

The start- steering column with shaft.



Short vid of it sort of working.



Steering wheel cut on the lathe, and the center hub for it made out of a teensy piece of pipe.



The first iteration.



Assembled column.



There was one major flaw with this setup. Anyone spot it?



Guess I should have thought a little more about it before I tried that out... Easy fix. Sorta.

Saturday, April 11, 2015

Random "Invention" of the day...

Any guesses!?



Our school Resource Officer came down to my shop the other day and wondered if I could help him make something to wind up really loooonnnnnggggg rolls of paper he had to go through for some case. This is what we came up with.




You can see the roll in the last pic- he had dozens of them to go through.  I think it took less time to cut the bits out than it took for the glue gun to warm up and slap the pieces together!  It must have worked out, because he hasn't been back!

Friday, April 10, 2015

7th graders can break ANYTHING...

Okay, so maybe it wasn't a student... The woods teacher was using at the time!



Obviously the poor hammer has been through the wringer.  Looks like it had started cracking a long time ago- Thinking that this must be the weak spot and it has fatigued over years and years of constant (miss)use.







It's been sitting on my desk for a day or two- Every. Single. Student.  has to ask me how I broke the hammer.

"I got a little upset with (insert students name here)..."

Monday, April 06, 2015

Lego Engines!

Try this on for size! This was built by one of my 7th grade students. It's powered by a Lego Mindstorms NXT and actually runs pretty darn smoothley!



Square piston and crankshaft.



Interesting spoked flywheel and the "electric start".



Intake / exhaust port at the bottom of the cylinder.



Video of it in action!



He said he just kinda started putting stuff together and this is what came out of it. Very impressive!


Now, I could have sworn I posted this one somewhere but can't seem to find it... So here it is (again?).

This was built by one of my 8th grade students that was also building my wobbler air engine.  Same story- he was playing with legos and this sort of emerged from the chaos.  This one even RUNS on compressed air.  It takes a LOT of it though-  lots of leaks through all the gaps.







Kind of hard to see but if you look to the right of the little square lego piece you can see the air intake port.



And of course a video of it in action!

Sunday, April 05, 2015

Custom Hot Wheels- Lickety Split #3

Gonna need a great big fat V8 for a drag car, right?  Well, how about a thumbnail sized aluminum block V8?  Will that work?

Block and trans cut / filed from one solid piece.







More engine work. Start of the heads and valve covers.  Exhaust ports were drilled at a bit of an angle so the pipes will sweep to the back.



Some file work done so it looks like there are valve covers.



Start of the blower and intake manifold. Blower was made on the lathe and then cut flat on the bottom.  Manifold was hand filed.



Exhaust pipes.  Made out of 1/8" aluminum tubing.



Still need to trim them down but something along these lines.



Little bit of paint (FORD blue, of course!),





Me likey.





Starting to look like it might show some potential on the strip!